Product Description
U1P-Duty SAE 5W-40 Full Synthetic 6 Heavy-Duty Motor Oil, API CK-4/SN is formulated with synthetic base oil and a premium additive package.
This oil is designed for use in for use in high-speed four-stroke cycle diesel engines designed to meet 2017 model year on-highway and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines.
This oil is especially effective at sustaining emission control system durability where particulate filters and other advanced after treatment systems are used. U1P-Duty SAE 5W-40 Full Synthetic 6 Heavy-Duty Motor Oil, API CK-4/SN provide enhanced protection against oil oxidation, viscosity loss due to shear, and oil aeration as well as protection against catalyst poisoning, particulate filter blocking, engine wear, piston deposits, degradation of low- and high-temperature properties, and soot-related viscosity increase.
In addition to API CK-4, this oil exceeds the performance criteria of CJ-4, CI-4 with CI-4 PLUS, CI-4, and CH-4 and can effectively lubricate engines calling for those API Service Categories. When using this product in conjunction with fuel containing higher than 15 ppm of sulfur, consult the engine manufacturer for service interval recommendations.
Ultra1Plus™ SAE 5W-40 Full Synthetic Heavy-Duty Motor Oil, API CK-4/SN highlights:
- Resists viscosity loss.
- Minimizes oil consumption.
- Provide improved wear protection.
- Extended service interval.
- Resistance to oil oxidation and high-temperature volatility.
Ultra1Plus™ can export products worldwide. Products available for larger purchases, truckloads and pallets, please CONTACT US
WHAT DOES IT MEAN WHEN A PRODUCT IS "UNAVAILABLE"?
Safety Data Sheets & Product Information:
ENGLISH:
SPANISH:
WARNING: California Proposition 65 www.p65warnings.ca.gov
| Typical Properties | |
| SAE J300 Viscosity Grade | 5W-40 |
| Appearance | Amber Transparent Liquid |
| Viscosity @ 40°C, cSt, ASTM D445 | 86.8 |
| Viscosity @ 100°C, cSt, ASTM D445 | 14.5 |
| CCS Apparent Viscosity, cP, ASTM D5293 | 5,600@-30°C |
| MRV Apparent Viscosity, cP, ASTM D4684 | 22,000@-35°C |
| Flash Point, °C, ASTM D92 | 218 |
| Pour Point, °C, ASTM D97 | -40 |
| Total Base Number, mg KOH/g, ASTM D2896 | 9 |
| Exceeds Performance Requirements |
| API CK-4, CJ-4, CI-4 Plus, CI-4, CH-4 |
| API SN, SM, SJ, SF |
| ACEA E9-12 |
| Ford WSS-M2C171-F1 |
| Cummins CES 20086 |
| Mack EOS 4.5 |
| DDC 93K222 |
| Caterpillar ECF-3 |
| Daimler MB 228.31 |
| Volvo VDS-4.5 |
| Renault Trucks RLD-4 |
| MTU Type 2.1 |
| Deutz DQC III-10 LA |
Handling:
- Avoid extremes of temperature.
- Product in cardboard cartons must be stored under cover and away from damp conditions.
- Drums (barrels) should be stored under cover if possible.
- If drums must be stored outside then lay them on their side to prevent water collecting around the bungs.
