Can You Mix Motor Oils with Different Viscosities?
Your oil light comes on, or the dipstick reads low, and the only bottle on the shelf is a different grade. Can you pour it in?
Short answer: using one viscosity grade, the one your vehicle manufacturer specifies, is a maintenance recommendation. It isn't because grades like 0W-12 and 0W-20 are chemically incompatible: they aren't. It's because the blend no longer matches the formulation your engine was designed around, and nobody can guarantee its properties.
Here's what happens when you mix, why one grade is the safe choice, and what to do if you're stuck.
Part 1: What happens when you mix two grades
What is mixing, really? You're blending two oils with different viscosities. The result lands somewhere in between, closer to whichever one you used more of.
Example: your engine holds 4 quarts of 0W-12 and you add 1 quart of 0W-20. The mix ends up thicker than 0W-12 and thinner than 0W-20. It isn't a true 0W-12 anymore.
Will the oils fight each other? Motor oils of different grades aren't chemically incompatible, and a mix doesn't damage the engine right away. The problem is what you lose: nobody can guarantee the blend keeps the properties and certifications of either original oil.
Why does the ratio matter? A quart in a five-quart engine is one fifth of the oil. A quart in a four-quart engine is one quarter. The smaller your engine's oil capacity, the more one bottle of a different grade moves the mix.
Proof it adds up: under the SAE J300 standard, a 0W-12 sits between 5.0 and 7.1 cSt at 100 °C, while a 0W-20 sits between 6.9 and 9.3 cSt. Mixing the two pulls your oil out of the 0W-12 range and toward a grade your engine wasn't built around.
Part 2: Why one grade is the safe choice
Your engine was designed around one grade. The manufacturer picked a viscosity for how the engine is built and how it should perform. A mix sits somewhere the manufacturer never specified.
The certifications belong to each oil, not the blend. An oil is tested and certified as a finished formulation. Once you blend two, you have something that was never tested as a whole.
Ultra-low viscosity engines leave less room. Engines that call for 0W-8 or 0W-12 are built around a very thin oil. A thicker mix moves them further from that design than it would a 0W-20 or 5W-30 engine.
Thinner isn't automatically better either. Low-viscosity oil is designed for specific engines. Adding a thinner oil to an engine that wasn't built for it doesn't bring more efficiency or better protection.

Part 3: What to do if you're stuck
Plan ahead. The simplest fix is a spare quart of the right grade in your garage or trunk, so a top-off never forces a choice.
If the level is low and you can't find your grade, an emergency top-off with a compatible oil can be better than running the engine low on oil. Don't just grab the closest grade: check the alternatives your vehicle manufacturer authorizes in the owner's manual, or ask your dealer. Then get back to the right oil as soon as you can.
If the low oil pressure warning is on, don't drive. A pressure warning is a different problem from a low dipstick reading. Stop and get help before you run the engine.
If a different grade already went in, change the oil to the grade your owner's manual calls for. Don't wait for the next scheduled service.
Check why the oil was low. An engine that keeps needing top-offs may be burning or leaking oil. If you're adding oil between every change, have a shop take a look.
Example: a driver on a road trip finds the oil low and no 0W-12 at the gas station. They check the owner's manual for an authorized alternative, top off with it, and change the oil back to 0W-12 as soon as they're home. Then they put a spare quart in the trunk for next time.
Frequently asked questions
Will mixing two grades damage my engine?
Not right away. Different grades aren't chemically incompatible. Sticking to one grade is a maintenance recommendation: the blend no longer matches what your engine was designed for, and nobody can guarantee its properties.
Can I mix synthetic and conventional oil?
They aren't chemically incompatible, but the same logic applies: you no longer have the full synthetic oil you chose, and the blend isn't certified as either one. Change back at your next service.
Can I mix two brands of the same grade?
Generally yes, if both oils meet the specifications your engine requires. Our recommendation is still to keep one product for the whole service interval, so the formulation and additive package stay consistent.
How soon should I change the oil after mixing grades?
As soon as you reasonably can, back to the grade your owner's manual calls for.
Can I mix 0W-8 and 0W-12?
We don't recommend it. They're different grades, and an engine that calls for 0W-8 is designed around that thinner oil.
Is it OK to top off with a different grade if my oil is low?
In an emergency, a compatible oil can be better than running low. Check the alternatives your manufacturer authorizes first, don't drive with a low oil pressure warning, and change back to the right grade soon.
What's the easiest way to avoid mixing?
Keep a quart of your engine's exact grade at home. A top-off then never forces a choice.
Keep reading
Not sure which grade your engine needs in the first place? Read Does Your Engine Need 0W-8 or 0W-12 Oil? 4 Ways to Know for Sure.
Ultra1Plus blends full synthetic motor oils in the USA in 0W-8, 0W-12, 0W-16 and 0W-20, so you can keep the exact grade your engine calls for on hand.